404

D7net
:/ snap / snapd / 28254 / snap /
Filename : snapcraft.yaml
back
name: snapd
type: snapd
summary: Daemon and tooling that enable snap packages
description: |
  Install, configure, refresh and remove snap packages. Snaps are
  'universal' packages that work across many different Linux systems,
  enabling secure distribution of the latest apps and utilities for
  cloud, servers, desktops and the internet of things.

  Start with 'snap list' to see installed snaps.
adopt-info: snapd
# build-base is needed here for snapcraft to build this snap as with "modern"
# snapcraft
build-base: core22
package-repositories:
  - type: apt
    ppa: snappy-dev/image
grade: stable
license: GPL-3.0
confinement: strict

# Note that this snap is unusual in that it has no "apps" section.
#
# It is started via re-exec on classic systems and via special
# handling in the core18 snap on Ubuntu Core Systems.
#
# Because snapd itself manages snaps it must currently run totally
# unconfined (even devmode is not enough).
#
# See the comments from jdstrand in
# https://forum.snapcraft.io/t/5547/10

# There is no explicit mechanism for passing parameters/configuration through
# snapcraft at snap build time, so instead the build process looks for (or
# creates) the following stamp files, which influence the build process:
#
# - test-build - created by the CI (or the in-repo test build script), indicates
#   a test build with version override to 1337.*
# - fips-build - created by the CI or snapd part 'pull' stage to indicate a
#   build with FIPS support
# - fips-build-lp - only created by snapd part 'pull' stage, when the build
#   environment has been identified to be LP within the FIPS-CC-STIG project,
#   where the snapd snap recipe is named snapd-fips
#
parts:
  dynamic-linker:
    plugin: nil
    build-packages:
      - gawk
      - bison
      - quilt
      - python3-pyelftools
      - xz-utils
    source: https://git.launchpad.net/ubuntu/+source/glibc
    source-branch: ubuntu/jammy-updates
    source-type: git
    <<:
      - &dynamic-linker
        build-environment:
          - to amd64:
              - DYNAMIC_LINKER: ld-linux-x86-64.so.2
          - to s390x:
              - DYNAMIC_LINKER: ld64.so.1
          - to arm64:
              - DYNAMIC_LINKER: ld-linux-aarch64.so.1
          - to armhf:
              - DYNAMIC_LINKER: ld-linux-armhf.so.3
          - to riscv64:
              - DYNAMIC_LINKER: ld-linux-riscv64-lp64d.so.1
          - to ppc64el:
              - DYNAMIC_LINKER: ld64.so.2
    override-pull: |
      craftctl default
      QUILT_PATCHES=debian/patches quilt push -a
      patch -p1 <"${CRAFT_PROJECT_DIR}/build-aux/snap/local/rename-dynamic-loader-variables.patch"

    override-build: |
      rm -rf build
      mkdir -p build
      cd build
      unset LDFLAGS
      unset CPPFLAGS
      export CFLAGS="-pipe -O2 -g"
      cat <<EOF >configparms
      libdir=/snap/snapd/current/usr/lib/${CRAFT_ARCH_TRIPLET_BUILD_FOR}
      slibdir=/snap/snapd/current/usr/lib/${CRAFT_ARCH_TRIPLET_BUILD_FOR}
      rtldir=/snap/snapd/current/usr/lib/${CRAFT_ARCH_TRIPLET_BUILD_FOR}
      EOF
      "${CRAFT_PART_SRC_WORK}/configure" --prefix=/snap/snapd/current/usr
      make -j"${CRAFT_PARALLEL_BUILD_COUNT}" -C .. objdir="${PWD}" "${PWD}/linkobj/libc_pic.a"
      make elf/ldso_install DESTDIR="${CRAFT_PART_INSTALL}"
      "${CRAFT_PROJECT_DIR}/build-aux/snap/local/minidebuginfo" "${CRAFT_PART_INSTALL}/snap/snapd/current/usr/lib/${CRAFT_ARCH_TRIPLET_BUILD_FOR}/${DYNAMIC_LINKER}"
      install -Dm755 -t "${CRAFT_PART_INSTALL}/usr/lib/${CRAFT_ARCH_TRIPLET_BUILD_FOR}" "${CRAFT_PART_INSTALL}/snap/snapd/current/usr/lib/${CRAFT_ARCH_TRIPLET_BUILD_FOR}/${DYNAMIC_LINKER}"
    stage:
      - usr/lib/$CRAFT_ARCH_TRIPLET_BUILD_FOR/ld*.so*

  runtime:
    plugin: nil
    stage-packages:
      - libblkid1
      - libc6
      - libcap2
      - libexpat1
      - libgcc-s1
      - liblz4-1
      - liblzma5
      - liblzo2-2
      - libseccomp2
      - libudev1
      - libzstd1
      - xdelta3
      - zlib1g
      - on armhf:
        - libteec1
      - on arm64:
        - libteec1
    stage:
      - -usr/lib/$CRAFT_ARCH_TRIPLET_BUILD_FOR/ld*.so*
      - -lib32
      - -lib64
      - -usr/lib32
      - -usr/lib64
      - -etc/ld.so.conf.d
      - -usr/share/man
      - -usr/share/lintian
      - -usr/share/lintian/**
      - -usr/lib/$CRAFT_ARCH_TRIPLET_BUILD_FOR/libnss_*.so.2
    override-build: |
      craftctl default
      cp -avT "${CRAFT_PART_INSTALL}/lib/${CRAFT_ARCH_TRIPLET_BUILD_FOR}" "${CRAFT_PART_INSTALL}/usr/lib/${CRAFT_ARCH_TRIPLET_BUILD_FOR}"
      rm -rf "${CRAFT_PART_INSTALL}/lib/${CRAFT_ARCH_TRIPLET_BUILD_FOR}"
      rm -f "${CRAFT_PART_INSTALL}/lib/${DYNAMIC_LINKER}"
      find "${CRAFT_PART_INSTALL}/usr/share/doc" \( -not -type d -not -name "copyright" -delete \) -o \( -type d -empty -delete \)
    <<:
      - *dynamic-linker
    # FIXME: uncomment when https://bugs.launchpad.net/snapcraft/+bug/2097440 is fixed
    # override-prime: |
    #   craftctl default
    #   python3 "${CRAFT_PROJECT_DIR}/build-aux/snap/local/patch-dl.py" "/snap/snapd/current/usr/lib/${CRAFT_ARCH_TRIPLET_BUILD_FOR}/${DYNAMIC_LINKER}"

  # FIXME: remove when https://bugs.launchpad.net/snapcraft/+bug/2097440 is fixed
  prime-runtime:
    plugin: nil
    after:
      - runtime
    <<:
      - *dynamic-linker
    override-prime: |
      craftctl default
      CRAFT_PART_INSTALL="${CRAFT_PART_INSTALL}/../../runtime/install" \
        python3 "${CRAFT_PROJECT_DIR}/build-aux/snap/local/patch-dl.py" "/snap/snapd/current/usr/lib/${CRAFT_ARCH_TRIPLET_BUILD_FOR}/${DYNAMIC_LINKER}"

  apparmor:
    plugin: autotools
    build-packages:
      - autoconf-archive
      - bison
      - flex
      - gettext
      - g++
      - pkg-config
      - wget
      - libzstd-dev
    source: https://gitlab.com/apparmor/apparmor/-/archive/v5.0.2/apparmor-v5.0.2.tar.gz
    source-checksum: sha256/bef45f228c0bde2f80d9630084e56bd8020b3fc4dfa7ee48a6aca585bb5ea0ed
    override-build: |
      # For some reason, some snapcraft version remove the "build-aux" folder
      # and move the contents up when the data is uploaded; this conditional
      # manages it.
      LOCAL_APPARMOR_DIR="${CRAFT_PROJECT_DIR}"/build-aux/snap/local/apparmor/
      if [ ! -d $LOCAL_APPARMOR_DIR ]; then
        LOCAL_APPARMOR_DIR="${CRAFT_PROJECT_DIR}"/snap/local/apparmor/
      fi

      cd "${CRAFT_PART_BUILD}"/libraries/libapparmor
      ./autogen.sh
      ./configure --prefix=/usr --libdir="/usr/lib/${CRAFT_ARCH_TRIPLET_BUILD_FOR}" --disable-man-pages --disable-perl --disable-python --disable-ruby --disable-shared
      make -j"${CRAFT_PARALLEL_BUILD_COUNT}"
      make -C src install DESTDIR="${CRAFT_PART_INSTALL}"
      make -C include install DESTDIR="${CRAFT_PART_INSTALL}"
      cd ${CRAFT_PART_BUILD}/parser
      # copy in a pregenerated list of network address families so that the
      # parser gets built to support as many as possible even if glibc in
      # the current build environment does not support them
      cp -a "${LOCAL_APPARMOR_DIR}"/af_names.h .
      make -j"${CRAFT_PARALLEL_BUILD_COUNT}" WITH_STATIC_LINKING=1
      install -Dm755 -s -t "${CRAFT_PART_INSTALL}/usr/lib/snapd" apparmor_parser
      install -Dm644 -t "${CRAFT_PART_INSTALL}/usr/lib/snapd/apparmor" parser.conf
      cd "${CRAFT_PART_BUILD}/profiles"
      make -j"${CRAFT_PARALLEL_BUILD_COUNT}"
      mkdir -p "${CRAFT_PART_INSTALL}/usr/lib/snapd/apparmor.d"
      cp -a apparmor.d/abi "${CRAFT_PART_INSTALL}/usr/lib/snapd/apparmor.d"
      cp -a apparmor.d/abstractions "${CRAFT_PART_INSTALL}/usr/lib/snapd/apparmor.d"
      cp -a apparmor.d/tunables "${CRAFT_PART_INSTALL}/usr/lib/snapd/apparmor.d"
    prime:
      # We are statically linked
      - -usr/lib/$CRAFT_ARCH_TRIPLET_BUILD_FOR/**
      - -usr/include
    <<:
      - *dynamic-linker
    override-prime: |
      craftctl default
      python3 "${CRAFT_PROJECT_DIR}/build-aux/snap/local/patch-dl.py" "/snap/snapd/current/usr/lib/${CRAFT_ARCH_TRIPLET_BUILD_FOR}/${DYNAMIC_LINKER}"

  patchelf:
    plugin: autotools
    build-packages:
      - autoconf-archive
    # as of 0.18.0-1.1build1 in Oracular, here are no relevant patches to apply
    source: http://archive.ubuntu.com/ubuntu/pool/universe/p/patchelf/patchelf_0.18.0.orig.tar.gz
    source-checksum: sha256/1451d01ee3a21100340aed867d0b799f46f0b1749680028d38c3f5d0128fb8a7
    # nothing to prime
    prime: [-*]

  snapd:
    plugin: nil
    source: .
    build-snaps:
      - go/1.23/stable # the default Go toolchain
    after:
      - apparmor
      - patchelf
    build-packages:
      - git
      - dpkg-dev
      - autoconf
      - autoconf-archive
      - automake
      - xfslibs-dev
      - libblkid-dev
      - libudev-dev
      - libcap-dev
      - libseccomp-dev
      - libselinux1-dev
      - pkg-config
      - libcap2-bin
      - on armhf:
        - optee-client-dev
      - on arm64:
        - optee-client-dev
      - xz-utils
    override-pull: |
      craftctl default
      ln -sf packaging/ubuntu-16.04 debian
      # set version, this needs dpkg-parsechangelog (from dpkg-dev) and git
      VERSION="$(./mkversion.sh --output-only)"

      if [ -f fips-build ]; then
          # CI can set a build stamp for enabling the FIPS build mode
          echo "-- detected FIPS build from CI build stamp"
      fi

      if [ "${VERSION/+fips/}" != "$VERSION" ] ; then
          # we have a '+fips' element in the version, which may be coming from
          # debian/changelog or git tag
          echo "-- detected FIPS build from version $VERSION"
          touch fips-build
      fi

      # check for triggers that indicate a build on LP of the snapd-fips snap
      # recipe https://launchpad.net/~fips-cc-stig/fips-cc-stig/+snap/snapd-fips
      is_lp_fips_build="$(./release-tools/is-lp-fips-build.sh)"
      if [ "$is_lp_fips_build" = "true" ]; then
          echo "-- detected FIPS build from LP location"
          touch fips-build
          touch fips-build-lp
      fi

      if [ -f fips-build ]; then
          if [ "${VERSION/+fips/}" = "$VERSION" ] ; then
              # we have a fips-build marker, but fips tag isn't yet part of the
              # snap version, let's add it
              echo "-- appending FIPS tag to version $VERSION"
              VERSION="$VERSION+fips"
          fi
      fi

      if [ -f test-build ]; then
          VERSION="1337.${VERSION}"
      fi
      craftctl set version="$VERSION"

      ./get-deps.sh --skip-unused-check
    override-build: |
      # this should be passed through build environment, but we're already
      # anchoring dynamic linker env variables
      GO_TOOLCHAIN_FIPS_CHANNEL="1.23-fips/stable"

      VERSION="$(craftctl get version)"
      if [ -f fips-build ] ; then
          # use the fips channel of Go
          snap refresh --channel "$GO_TOOLCHAIN_FIPS_CHANNEL" go
          # make sure it is really the Go FIPS toolchain
          if ! test -f /snap/go/current/src/crypto/internal/backend/openssl_linux.go; then
              echo "Go FIPS toolschain verification failed: cannot find /snap/go/current/src/crypto/internal/backend/openssl_linux.go"
              exit 1
          fi
      fi
      # make sure to set the version we declared in pull
      ./mkversion.sh "$VERSION"

      # double check the toolchain
      echo "--- go version $(go version)"
      echo "--- go is at $(which go)"

      cd "${CRAFT_PART_BUILD}/cmd"

      autoreconf -fvi
      ./configure \
        --prefix=/usr \
        --libexec=/usr/lib/snapd \
        --sysconfdir=/etc \
        --localstatedir=/var \
        --without-unit-tests \
        --enable-apparmor \
        --enable-static-libapparmor \
        --enable-selinux \
        --enable-static-libselinux \
        --disable-host-binaries \
        --enable-nvidia-multiarch \
        --with-host-arch-triplet=$(dpkg-architecture -qDEB_HOST_MULTIARCH) \
        $(test "$(uname -m)" = x86_64 && echo --with-host-arch-32bit-triplet=$(dpkg-architecture -ai386 -qDEB_HOST_MULTIARCH))

      make -j"${CRAFT_PARALLEL_BUILD_COUNT}"
      make DESTDIR="${CRAFT_PART_INSTALL}" install

      cd "${CRAFT_PART_BUILD}"

      # Disable buildvcs:
      #  * We do not use it
      #  * When building in a git worktree, snapcraft does not share
      #    the main directory, and it fails.
      EXTRA_GO_FLAGS="-buildvcs=false"

      CMDS=(lib/snapd/snapd
            # core-initrd for UC20 still depends on snap-bootstrap
            # being started from snap because of broken re-execution
            # and fixes that were not yet backported
            lib/snapd/snap-bootstrap
            lib/snapd/snap-exec
            lib/snapd/snap-failure
            lib/snapd/snap-fde-keymgr
            lib/snapd/snap-preseed
            lib/snapd/snap-recovery-chooser
            lib/snapd/snap-repair
            lib/snapd/snap-seccomp
            lib/snapd/snap-update-ns
            lib/snapd/snapctl
            lib/snapd/snapd-apparmor
            lib/snapd/snap-gpio-helper)
      if [ -f fips-build ]; then
        # build FIPS dispatcher
        CMDS+=(lib/snapd/snap-fips-dispatch)
      fi

      for cmd in "${CMDS[@]}"; do
        case "${cmd}" in
           # FIXME: some binaries need to be run confined in apps. But
           # instead we should allow apps to access dynamic linkers
           # and libraries from snapd.
           lib/snapd/snap-exec|lib/snapd/snapctl)
             export CGO_ENABLED=0
             GO_LD_FLAGS=()
             CHECK_STATIC=1
             ;;
           lib/snapd/snap-update-ns)
             export CGO_ENABLED=1
             GO_LD_FLAGS=(-ldflags '-extldflags "-static"')
             CHECK_STATIC=1
             ;;
           *)
             export CGO_ENABLED=1
             GO_LD_FLAGS=()

             case "${CRAFT_ARCH_BUILD_FOR}" in
               arm64|armhf)
                 GO_LD_FLAGS+=(-ldflags "-extldflags \"-L/usr/lib/${CRAFT_ARCH_TRIPLET_BUILD_FOR}"\")
                 ;;
             esac

             case "${CRAFT_ARCH_BUILD_FOR}" in
               armhf)
                 # https://bugs.launchpad.net/ubuntu/+source/snapd/+bug/1822738
                 ;;
               *)
                 GO_LD_FLAGS+=(-buildmode=pie)
                 ;;
             esac
             unset CHECK_STATIC
             ;;
        esac

        TAGS=(snapdusergo osusergo)

        # general build tags, note that version 1337 is used only in CI and
        # triggers testing specific build tags which produce binaries that are
        # insecure for use in production systems
        case "${cmd}" in
          lib/snapd/snap-bootstrap)
            TAGS+=(nomanagers)
            ;;
        esac

        case "${VERSION}" in
          1337.*)
            TAGS+=(withtestkeys withbootassetstesting faultinject statelocktrace structuredlogging)
            ;;
        esac

        # include optee on arm64 and armhf
         case "${CRAFT_ARCH_BUILD_FOR}" in
           arm64|armhf)
               case "${cmd}" in
                 lib/snapd/snapd|lib/snapd/snap-bootstrap)
                   TAGS+=(optee)
                   ;;
               esac
             ;;
         esac

        # FIPS specific build tags
        if [ -f fips-build ]; then
          case "${cmd}" in
            # per snapd FIPS spec, FIPS build tags are only relevant for snapd,
            # snap, snap-repair and snap-bootstrap, tags:
            # - goexperiment.opensslcrypto - enable openssl crypto backend
            # - snapdfips - enable additional FIPS support (enforce FIPS compliant TLS)
            lib/snapd/snapd|lib/snapd/snap-repair|lib/snapd/snap-bootstrap)
              TAGS+=(goexperiment.opensslcrypto snapdfips)
              ;;
          esac
        fi

        output="${CRAFT_PART_INSTALL}/usr/${cmd}"
        go build -mod=vendor -tags "${TAGS[*]}" "${GO_LD_FLAGS[@]}" ${EXTRA_GO_FLAGS-} -o "${output}" "github.com/snapcore/snapd/cmd/$(basename ${cmd})"
        if [ "${CHECK_STATIC-}" = 1 ]; then
          if objdump -p "${output}" | grep INTERP; then
            echo "${output} is not static!" 1>&2
            exit 1
          fi
        fi
        unset CGO_ENABLED
      done

      make -C data -j"${CRAFT_PARALLEL_BUILD_COUNT}" all
      # wrappers/core18.go expects units in fixed paths so even when
      # systemd package will those, they have to continue to match our
      # paths. We force the value here in case we change the default.
      make -C data install DESTDIR="${CRAFT_PART_INSTALL}" SYSTEMDUSERUNITDIR=/usr/lib/systemd/user SYSTEMDSYSTEMUNITDIR=/lib/systemd/system
      # UC depends on this name (symlink)
      mv "${CRAFT_PART_INSTALL}/etc/profile.d/snapd.sh" "${CRAFT_PART_INSTALL}/etc/profile.d/apps-bin-path.sh"

      install -Dm644 data/info "${CRAFT_PART_INSTALL}/usr/lib/snapd/info"
      install -Dm644 data/preseed.json "${CRAFT_PART_INSTALL}/usr/lib/snapd/preseed.json"

      install -Dm644 -t "${CRAFT_PART_INSTALL}/usr/lib/snapd" data/completion/bash/complete.sh data/completion/bash/etelpmoc.sh
      install -Dm644 -t "${CRAFT_PART_INSTALL}/usr/share/bash-completion/completions" ./data/completion/bash/snap

      # link usr/bin/snap -> usr/lib/snapd/snapd
      mkdir -p "${CRAFT_PART_INSTALL}/usr/bin"
      ln -v -s -r "${CRAFT_PART_INSTALL}/usr/lib/snapd/snapd" "${CRAFT_PART_INSTALL}/usr/bin/snap"

      if [ -f fips-build ]; then
        # Set up FIPS dispatch: replace each original binary with a symlink
        # to snap-fips-dispatch, and rename the original to a -fips suffix.
        #
        # Real binary (renamed)                       Dispatch symlink (original path)
        # <root>/usr/lib/snapd/snapd-fips          <- <root>/usr/lib/snapd/snapd
        # <root>/usr/lib/snapd/snap-repair-fips    <- <root>/usr/lib/snapd/snap-repair
        # <root>/usr/lib/snapd/snap-bootstrap-fips <- <root>/usr/lib/snapd/snap-bootstrap
        #
        # usr/bin/snap is a symlink to usr/lib/snapd/snapd (now the dispatch symlink),
        # so the dispatcher sees argv[0]="snap" and resolves to usr/bin/snap-fips.
        # Create that symlink pointing at the renamed FIPS binary.

        for cmd in lib/snapd/snapd lib/snapd/snap-repair lib/snapd/snap-bootstrap; do
          mv -v "${CRAFT_PART_INSTALL}/usr/${cmd}" "${CRAFT_PART_INSTALL}/usr/lib/snapd/$(basename $cmd)-fips"
          ln -v -s -r "${CRAFT_PART_INSTALL}/usr/lib/snapd/snap-fips-dispatch" "${CRAFT_PART_INSTALL}/usr/${cmd}"
        done
        # usr/bin/snap-fips is the dispatch target when argv[0]="snap"; point it at snapd-fips.
        ln -v -s -r "${CRAFT_PART_INSTALL}/usr/lib/snapd/snapd-fips" "${CRAFT_PART_INSTALL}/usr/bin/snap-fips"
      fi

      # TODO: For now snapd expects a renamed apparmor profile to
      # work-around LP#1673247. We should fix that since the snapd
      # should not need that work-around.
      mv "${CRAFT_PART_INSTALL}/etc/apparmor.d/usr.lib.snapd.snap-confine" "${CRAFT_PART_INSTALL}/etc/apparmor.d/usr.lib.snapd.snap-confine.real"

      # copy helper for collecting debug output
      cp -av debug-tools/snap-debug-info.sh ${CRAFT_PART_INSTALL}/usr/lib/snapd/

      if sh -x ./mkversion.sh --output-only | grep "dirty"; then
        mkdir -p "${CRAFT_PART_INSTALL}/usr/lib/snapd"
        (
          echo "dirty git tree during build detected:"
          git status
          git diff
        ) > "${CRAFT_PART_INSTALL}/usr/lib/snapd/dirty-git-tree-info.txt"
      fi

      find "${CRAFT_PART_INSTALL}/usr/lib/snapd" "${CRAFT_PART_INSTALL}/usr/bin" -type f -exec "${CRAFT_PROJECT_DIR}/build-aux/snap/local/minidebuginfo" {} ";"

      if [ -f fips-build ]; then
        touch "${CRAFT_PART_INSTALL}/fips-build"
      fi
      if [ -f fips-build-lp ]; then
        touch "${CRAFT_PART_INSTALL}/fips-build-lp"
      fi

      # ensure capabilities are set
      setcap -q - "${CRAFT_PART_INSTALL}/usr/lib/snapd/snap-confine" \
           < "${CRAFT_PART_INSTALL}/usr/lib/snapd/snap-confine.caps"
      getcap "${CRAFT_PART_INSTALL}/usr/lib/snapd/snap-confine"

    <<:
      - *dynamic-linker
    prime:
      # drop FIPS build stamps
      - -fips-build
      - -fips-build-lp
    override-prime: |
      craftctl default
      # use patchelf built in earlier step
      PATH="${CRAFT_STAGE}"/usr/local/bin:$PATH \
          "${CRAFT_PROJECT_DIR}/build-aux/snap/local/patch-dl.py" \
              "/snap/snapd/current/usr/lib/${CRAFT_ARCH_TRIPLET_BUILD_FOR}/${DYNAMIC_LINKER}"

      # verify file capabilities
      caps="$(getcap "${CRAFT_PART_INSTALL}/usr/lib/snapd/snap-confine" | awk '{print $2}')"
      expected_caps="$(cat "${CRAFT_PART_INSTALL}/usr/lib/snapd/snap-confine.caps")"
      echo "-- expecting caps: $expected_caps"
      echo "-- actual caps:    $caps"
      test "$caps" = "$expected_caps"

  libcrypto-fips:
    plugin: nil
    after:
      - snapd
    override-build: |
      # XXX this should be done in pull, but apparently ordering is not honored
      # for 'pull' step of parts

      # FIPS stamp files were created in the 'snap' part build
      if [ -f "${CRAFT_STAGE}/fips-build-lp" ]; then
        mkdir -p etc/apt/preferences.d/
        # need to up the priority of the repository
        # TODO what if we need to choose between FIPS and FIPS preview?
        cat <<-'EOF' > /etc/apt/preferences.d/fips.pref
      Package: *
      Pin: release o=LP-PPA-ubuntu-advantage-pro-fips-updates
      Pin-Priority: 1010
      EOF
        apt update
        # FIPS libraries required by snapd
        mkdir fips-debs
        (
          cd fips-debs
          apt download openssl libssl3 openssl-fips-module-3
        )
      elif [ -f "${CRAFT_STAGE}/fips-build" ]; then
        # grab the core22 from fips-updates channel
        /usr/bin/snap download --channel fips-updates/stable --basename core22-fips core22
      fi

      # TODO this is really a hack as we should likely be using on LP; The snapd
      # snap should include the information about a particular openssl version
      # which was included in the build but the core22 FIPS variant snap has
      # been stripped off of the manifest.
      if [ -f "${CRAFT_STAGE}/fips-build-lp" ]; then
        mkdir fips-libs-from-debs
        mkdir fips-libs-from-debs-stage

        # extract
        for f in fips-debs/*.deb; do
          dpkg -x "$f" fips-libs-from-debs
        done

        # and cherry pick the files we want
        (
          cd fips-libs-from-debs

          # XXX note with -print0 only the last match is printed
          find . \
            \( \
              -wholename './usr/lib/*-linux-gnu*/engines-3' \
              -o -wholename  './usr/lib/*-linux-gnu*/ossl-modules-3' \
              -o -wholename './usr/lib/*-linux-gnu*/libssl.so.3' \
              -o -wholename './usr/lib/*-linux-gnu*/libcrypto.so.3' \
            \) -print0 | \
              xargs -0 -- cp -av --parents --target ../fips-libs-from-debs-stage/
        )
        cp -av fips-libs-from-debs-stage/* "${CRAFT_PART_INSTALL}"
      elif [ -f "${CRAFT_STAGE}/fips-build" ]; then
        unsquashfs -d core22-fips-squashfs-root core22-fips.snap \
          'usr/lib/*-linux-gnu*/engines-3' \
          'usr/lib/*-linux-gnu*/ossl-modules-3' \
          'usr/lib/*-linux-gnu*/libssl.so.3' \
          'usr/lib/*-linux-gnu*/libcrypto.so.3'
        cp -av core22-fips-squashfs-root/* "${CRAFT_PART_INSTALL}"
      fi
      find "${CRAFT_PART_INSTALL}/" -ls

  check-linker:
    plugin: nil
    build-packages:
      - patchelf
    after:
      # Must run after everything else
      - snapd
      - runtime
      - prime-runtime
      - apparmor
      - dynamic-linker
    <<:
      - *dynamic-linker
    override-prime: |
      craftctl default
      "${CRAFT_PROJECT_DIR}/build-aux/snap/local/verify-dl.py" \
          "/snap/snapd/current/usr/lib/${CRAFT_ARCH_TRIPLET_BUILD_FOR}/${DYNAMIC_LINKER}"

  # TODO This is needed due to an unsquashfs crash on big pseudo-files in older
  # squashfs-tools. Revert to pulling the deb when snapd is moved to the core26
  # base.
  squashfs-tools:
    plugin: make
    after:
      - dynamic-linker
    <<:
      - *dynamic-linker
    source: https://github.com/plougher/squashfs-tools.git
    source-type: git
    source-tag: "4.7.4"
    override-build: |
      cd squashfs-tools
      make -j${CRAFT_PARALLEL_BUILD_COUNT}
      install -Dm755 --strip --target-directory="${CRAFT_PART_INSTALL}/usr/bin" "${CRAFT_PART_BUILD}/squashfs-tools/mksquashfs"
      install -Dm755 --strip --target-directory="${CRAFT_PART_INSTALL}/usr/bin" "${CRAFT_PART_BUILD}/squashfs-tools/unsquashfs"
    override-prime: |
      craftctl default
      python3 "${CRAFT_PROJECT_DIR}/build-aux/snap/local/patch-dl.py" "/snap/snapd/current/usr/lib/${CRAFT_ARCH_TRIPLET_BUILD_FOR}/${DYNAMIC_LINKER}"
    build-packages:
      - liblz4-dev
      - liblzma-dev
      - liblzo2-dev
      - libzstd-dev
      - zlib1g-dev