D7net
Home
Console
Upload
information
Create File
Create Folder
About
Tools
:
/
etc
/
java-11-openjdk
/
management
/
Filename :
management.properties
back
Copy
##################################################################### # Default Configuration File for Java Platform Management ##################################################################### # # The Management Configuration file (in java.util.Properties format) # will be read if one of the following system properties is set: # -Dcom.sun.management.jmxremote.port=<port-number> # or -Dcom.sun.management.config.file=<this-file> # # The default Management Configuration file is: # # $JRE/conf/management/management.properties # # Another location for the Management Configuration File can be specified # by the following property on the Java command line: # # -Dcom.sun.management.config.file=<this-file> # # If -Dcom.sun.management.config.file=<this-file> is set, the port # number for the management agent can be specified in the config file # using the following lines: # # ################ Management Agent Port ######################### # # For setting the JMX RMI agent port use the following line # com.sun.management.jmxremote.port=<port-number> # ##################################################################### # Optional Instrumentation ##################################################################### # # By default only the basic instrumentation with low overhead is on. # The following properties allow to selectively turn on optional # instrumentation which are off by default and may have some # additional overhead. # # com.sun.management.enableThreadContentionMonitoring # # This option enables thread contention monitoring if the # Java virtual machine supports such instrumentation. # Refer to the specification for the java.lang.management.ThreadMBean # interface - see isThreadContentionMonitoringSupported() method. # # To enable thread contention monitoring, uncomment the following line # com.sun.management.enableThreadContentionMonitoring ##################################################################### # RMI Management Properties ##################################################################### # # If system property -Dcom.sun.management.jmxremote.port=<port-number> # is set then # - A MBean server is started # - JRE Platform MBeans are registered in the MBean server # - RMI connector is published in a private readonly registry at # specified port using a well known name, "jmxrmi" # - the following properties are read for JMX remote management. # # The configuration can be specified only at startup time. # Later changes to above system property (e.g. via setProperty method), # this config file, the password file, or the access file have no effect to the # running MBean server, the connector, or the registry. # # # ########## RMI connector settings for local management ########## # # com.sun.management.jmxremote.local.only=true|false # Default for this property is true. (Case for true/false ignored) # If this property is specified as true then the local JMX RMI connector # server will only accept connection requests from clients running on # the host where the out-of-the-box JMX management agent is running. # In order to ensure backwards compatibility this property could be # set to false. However, deploying the local management agent in this # way is discouraged because the local JMX RMI connector server will # accept connection requests from any client either local or remote. # For remote management the remote JMX RMI connector server should # be used instead with authentication and SSL/TLS encryption enabled. # # For allowing the local management agent accept local # and remote connection requests use the following line # com.sun.management.jmxremote.local.only=false # # ###################### RMI SSL ############################# # # com.sun.management.jmxremote.ssl=true|false # Default for this property is true. (Case for true/false ignored) # If this property is specified as false then SSL is not used. # # For RMI monitoring without SSL use the following line # com.sun.management.jmxremote.ssl=false # com.sun.management.jmxremote.ssl.config.file=filepath # Specifies the location of the SSL configuration file. A properties # file can be used to supply the keystore and truststore location and # password settings thus avoiding to pass them as cleartext in the # command-line. # # The current implementation of the out-of-the-box management agent will # look up and use the properties specified below to configure the SSL # keystore and truststore, if present: # javax.net.ssl.keyStore=<keystore-location> # javax.net.ssl.keyStorePassword=<keystore-password> # javax.net.ssl.trustStore=<truststore-location> # javax.net.ssl.trustStorePassword=<truststore-password> # Any other properties in the file will be ignored. This will allow us # to extend the property set in the future if required by the default # SSL implementation. # # If the property "com.sun.management.jmxremote.ssl" is set to false, # then this property is ignored. # # For supplying the keystore settings in a file use the following line # com.sun.management.jmxremote.ssl.config.file=filepath # com.sun.management.jmxremote.ssl.enabled.cipher.suites=<cipher-suites> # The value of this property is a string that is a comma-separated list # of SSL/TLS cipher suites to enable. This property can be specified in # conjunction with the previous property "com.sun.management.jmxremote.ssl" # in order to control which particular SSL/TLS cipher suites are enabled # for use by accepted connections. If this property is not specified then # the SSL/TLS RMI Server Socket Factory uses the SSL/TLS cipher suites that # are enabled by default. # # com.sun.management.jmxremote.ssl.enabled.protocols=<protocol-versions> # The value of this property is a string that is a comma-separated list # of SSL/TLS protocol versions to enable. This property can be specified in # conjunction with the previous property "com.sun.management.jmxremote.ssl" # in order to control which particular SSL/TLS protocol versions are # enabled for use by accepted connections. If this property is not # specified then the SSL/TLS RMI Server Socket Factory uses the SSL/TLS # protocol versions that are enabled by default. # # com.sun.management.jmxremote.ssl.need.client.auth=true|false # Default for this property is false. (Case for true/false ignored) # If this property is specified as true in conjunction with the previous # property "com.sun.management.jmxremote.ssl" then the SSL/TLS RMI Server # Socket Factory will require client authentication. # # For RMI monitoring with SSL client authentication use the following line # com.sun.management.jmxremote.ssl.need.client.auth=true # com.sun.management.jmxremote.registry.ssl=true|false # Default for this property is false. (Case for true/false ignored) # If this property is specified as true then the RMI registry used # to bind the RMIServer remote object is protected with SSL/TLS # RMI Socket Factories that can be configured with the properties: # com.sun.management.jmxremote.ssl.config.file # com.sun.management.jmxremote.ssl.enabled.cipher.suites # com.sun.management.jmxremote.ssl.enabled.protocols # com.sun.management.jmxremote.ssl.need.client.auth # If the two properties below are true at the same time, i.e. # com.sun.management.jmxremote.ssl=true # com.sun.management.jmxremote.registry.ssl=true # then the RMIServer remote object and the RMI registry are # both exported with the same SSL/TLS RMI Socket Factories. # # For using an SSL/TLS protected RMI registry use the following line # com.sun.management.jmxremote.registry.ssl=true # # ################ RMI User authentication ################ # # com.sun.management.jmxremote.authenticate=true|false # Default for this property is true. (Case for true/false ignored) # If this property is specified as false then no authentication is # performed and all users are allowed all access. # # For RMI monitoring without any checking use the following line # com.sun.management.jmxremote.authenticate=false # # ################ RMI Login configuration ################### # # com.sun.management.jmxremote.login.config=<config-name> # Specifies the name of a JAAS login configuration entry to use when # authenticating users of RMI monitoring. # # Setting this property is optional - the default login configuration # specifies a file-based authentication that uses the password file. # # When using this property to override the default login configuration # then the named configuration entry must be in a file that gets loaded # by JAAS. In addition, the login module(s) specified in the configuration # should use the name and/or password callbacks to acquire the user's # credentials. See the NameCallback and PasswordCallback classes in the # javax.security.auth.callback package for more details. # # If the property "com.sun.management.jmxremote.authenticate" is set to # false, then this property and the password & access files are ignored. # # For a non-default login configuration use the following line # com.sun.management.jmxremote.login.config=<config-name> # # ################ RMI Password file location ################## # # com.sun.management.jmxremote.password.file=filepath # Specifies location for password file # This is optional - default location is # $JRE/conf/management/jmxremote.password # # If the property "com.sun.management.jmxremote.authenticate" is set to # false, then this property and the password & access files are ignored. # Otherwise the password file must exist and be in the valid format. # If the password file is empty or non-existent then no access is allowed. # # For a non-default password file location use the following line # com.sun.management.jmxremote.password.file=filepath # # ################# Hash passwords in password file ############## # com.sun.management.jmxremote.password.toHashes = true|false # Default for this property is true. # Specifies if passwords in the password file should be hashed or not. # If this property is true, and if the password file is writable, and if the # system security policy allows writing into the password file, # all the clear passwords in the password file will be replaced by # their SHA3-512 hash when the file is read by the server # # # ################ RMI Access file location ##################### # # com.sun.management.jmxremote.access.file=filepath # Specifies location for access file # This is optional - default location is # $JRE/conf/management/jmxremote.access # # If the property "com.sun.management.jmxremote.authenticate" is set to # false, then this property and the password & access files are ignored. # Otherwise, the access file must exist and be in the valid format. # If the access file is empty or non-existent then no access is allowed. # # For a non-default password file location use the following line # com.sun.management.jmxremote.access.file=filepath # # ################ Management agent listen interface ######################### # # com.sun.management.jmxremote.host=<host-or-interface-name> # Specifies the local interface on which the JMX RMI agent will bind. # This is useful when running on machines which have several # interfaces defined. It makes it possible to listen to a specific # subnet accessible through that interface. # # The format of the value for that property is any string accepted # by java.net.InetAddress.getByName(String). # # ################ Filter for ObjectInputStream ############################# # com.sun.management.jmxremote.serial.filter.pattern=<filter-string> # A filter, if configured, is used by java.io.ObjectInputStream during # deserialization of parameters sent to the JMX default agent to validate the # contents of the stream. # A filter is configured as a sequence of patterns, each pattern is either # matched against the name of a class in the stream or defines a limit. # Patterns are separated by ";" (semicolon). # Whitespace is significant and is considered part of the pattern. # # If a pattern includes a "=", it sets a limit. # If a limit appears more than once the last value is used. # Limits are checked before classes regardless of the order in the sequence of patterns. # If any of the limits are exceeded, the filter status is REJECTED. # # maxdepth=value - the maximum depth of a graph # maxrefs=value - the maximum number of internal references # maxbytes=value - the maximum number of bytes in the input stream # maxarray=value - the maximum array length allowed # # Other patterns, from left to right, match the class or package name as # returned from Class.getName. # If the class is an array type, the class or package to be matched is the element type. # Arrays of any number of dimensions are treated the same as the element type. # For example, a pattern of "!example.Foo", rejects creation of any instance or # array of example.Foo. # # If the pattern starts with "!", the status is REJECTED if the remaining pattern # is matched; otherwise the status is ALLOWED if the pattern matches. # If the pattern contains "/", the non-empty prefix up to the "/" is the module name; # if the module name matches the module name of the class then # the remaining pattern is matched with the class name. # If there is no "/", the module name is not compared. # If the pattern ends with ".**" it matches any class in the package and all subpackages. # If the pattern ends with ".*" it matches any class in the package. # If the pattern ends with "*", it matches any class with the pattern as a prefix. # If the pattern is equal to the class name, it matches. # Otherwise, the status is UNDECIDED.